Awei T36 TWS Wireless Headphone Bluetooth 5.0 Earphones Mini Earbuds With Mic in-Ear Headset Touch Pop-up

Highlight Awei T36 TRUE WIRELESS SPORTS EARBUDS with Charging Case True Wireless Enjoy Euphonious Melodies Product parameters: Bluetooth device name: AWEI T36 Bluetooth version: Bluetooth V5.0 Support mode: L2CAP/A2DP1.2 (AVCTP1.3/AVDTP1.2/AVRCP1.3) Transmission distance: ≤10 meters (without obstacles) Speaker diameter: 13MM Speaker impedance: 32 ohm ± 10% Frequency response: 20Hz-20KHz Sensitivity: 92dB/±3dB Mark wind size: Φ4.0*1.5mm SMD microphone Mark wind sensitivity: -92dB/±3dB Output power: 20mW Working voltage: 3.3V-3.7V Working time: 4-5 hours Standby time: 210 hours Charging time: about 1.5 hours Battery model: polymer battery 45mAh 3.7V charging compartment 320mAh with protection board Charging voltage: DC_5V Applicable products: Apple IPAD, MAC book, I phone, Android phone, PC (Need bluetooth dongle) Package Include： 1 * T36 Earbuds; 1 * Charging case; 1 * User’s manual; Pairing method: 1. Take the headset out of the charging compartment and turn it on until the red and blue lights flash alternately and the machine enters the search pairing state. 2. Activate the Bluetooth function of the mobile phone or other device, if it is an Android phone or device, please click the “Search Bluetooth device” option on the phone, if it is an IOS system phone or device, it will automatically search for the device; when the model of the Bluetooth headset is found After that, click to enter the pairing; when the pairing is successful, the headset will emit a notification sound that the connection is successful, and the headset indicator will flash slowly in blue and enter the connection standby state. Understand the product: Why can’t I charge the earbuds while the charging bay has power? –There is a blue partition film in the charging position of the earplugs, you need to remove the partition film to charge. When will the charging bay be fully charged? —The red light flashes quickly when the charging compartment is charging. When the charging bay is fully charged (plug in the data cable), the red light will be displayed; when the charging bay is fully charged (the data wire is not plugged in), the blue light will be displayed, and then it will go out! When will the headset be fully charged? —The earphone shows the red light in the charging compartment as normal charging, and it will automatically turn off the light when the charging reaches 50-100%. Why does the headphone have one light on and one light off? —Because the headsets have been successfully connected to each other at this time. If there is sound, it means the headset is working normally; if there is no sound from the headset, please restart it and it can be used normally! Category: BLUETOOTH HANDS FREE